LPG filtration, BP (British Petrolium) – installs MAGNOM MPU filtration products, in LPG Delivery Systems!

If you operate in the LPG industry & market, you will be aware of the problems caused in these systems by Ferrous & Ferrous Oxide contamination,

This contamination is generally produced within the delivery systems, by acidic compounds within the gas, eroding the steel pipe work & storage vessels.

Extensive piping systems and large storage facilities used in LPG storage and delivery operations were generating large quantities of rust and other ferrous contaminants at BP’s LPG operations Europe.

These contaminants were clogging valves corrupting product and interrupting filling operations.

It not only causes quality issues with the LPG product, but has a significant negative impact on system sensors, compressors, monitoring equipment & valves.

The problem caused by the presense of this harmful Fe/Ferous contamination, also manifests in customer applications, at ‘point of use’,

Where the contamination impacts on vehicle fuel delivery system components and in heating appliances etc… causing issues with the injection components, metering valves, nozzle blockages and general degradation of performance.

Magnom Filtration & Separation Technology, resolves this Fe contamination issue… down to ‘Sub Micron’ levels, without restricting the flow of gas product… Even when full of removed/collected contamination.

Magnom MPU Technology

Fast efficient removal of the damaging contamination present in all LPG systems!

MAGNOM’s Patented Technology effectively removed these harmful contaminants, from BP’s LPG distribution network, mitigating the need to constantly monitor and service of critical system control components.

While in operation, BP monitored the unbelivable ‘Lack’ of drop in pressure across the MAGNOM filter cores, even when full, after filling more than 30,000 11KG cylinders the loss of pressure across the core was less than 0.05 bar.

 

MAGNOM’s  high flow rate, high capacity contamination process units are available in a wide range of standard sizes to fit in your custom or standard bag filter housings. 

For additional information on MAGNOM’s Process Units and Patented Technology or indeed an overview of the many other standard products, please contact  one of our distributors Via… https://magnom.com/distributors/ or contact us direct, our contact information is available on our home page :- https://magnom.com/